产品列表PRODUCTS LIST
硫化氢H2S气体观测管120UH HYDROGEN SULPHIDE 2-20%，为您提供硫化氢检测管的详细介绍和价格，我公司为提高产品质量投资上百万元建立了检测管自动化生产线,引进*的标准气配置装置,建立了严格的检测管质量保证体系,并取得了计量器具生产许可证。日本光明理化学工业株式会社在气体分析领域开拓了六十年,形成了于世的“北川"式气体快速分析法,“北川"的历史就是检测管的历史。
更新时间：2024-04-24
在线留言
硫化氢H2S气体观测管120UH HYDROGEN SULPHIDE 2-20%
Tube 20UH
1. PERFORMANCE
1） Measuring range ：2-20％
Number of pump strokes 1/2（50ml）
2） Sampling time ：1 minute/1/ 2 pump stroke
3） Detectable limit ：0.05％
4） Shelf life ：3 years
5） Operating temperature ：0～40℃
6） Reading ：Direct reading from the scale calibrated by 1 /2 pump stroke
7） Colour change ：Pale blue→Black
2. RELATIVE STANDARD DEVIATION
RSD-low：10％ RSD-mid.：5％ RSD-high：5％
3. CHEMICAL REACTION
By reacting with Cupric sulphate（II）, Cupric sulphide is produced.
H2S＋CuSO4→CuS
4. CALIBRATION OF THE TUBE
STANDARD GAS CYLINDER METHOD
5. INTERFERENCE AND CROSS SENSITIVITY
GAS To pump
20
18
16
14
12
10
8
6
4
2
50ml
%
120UH HYDROGEN SULPHIDE
（NOTE）
1. Where the discolouration is over the scale, non-reacted Hydrogen sulphide remains in the pump. This residual
Hydrogen sulphide is not exhausted even if the pump handle is pushed back, and it still remains in the pump.
When the handle is pulled next, it is exhausted toward the operator from the stopper side of the pump.
Accordingly, air purging of the pump inside by pulling/pushing the handle several times should be done in
fresh air where there is not Hydrogen sulphide, because Hydrogen sulphide is very toxic. During the air
purging, protection apparatus such as a gas mask should be worn.
2. Maximum sampling volume of the gas shall be approximay 70mr.
Substance Interference Coexistence
Sulphur dioxide FIG.1 The accuracy of readings is not affected. Lower readings are given.
Carbon dioxide The accuracy of readings is
not affected.
0 2 4
20
Sulphur dioxide〔％〕�
FIG.1 Influence of Sulphur dioxide
上一篇：120U硫化氢H2S气体检测管120U HYDROGEN SULPHIDE 0.2-6.0ppm
下一篇：120UT硫化氢H2S气体测毒管120UT HYDROGEN SULPHIDE 2.5-40%
返回列表>>相关产品
发邮件给我们：554328895@qq.com
